# Lanes: Parallel Agent Work Units

A **lane** is a durable unit of parallel agent work — one working directory, many Claude Code sessions over time. This document describes what lanes are, how to use them, and how the dashboard displays pipeline progress.

## What is a lane?

A lane persists across session restarts, which is what makes a pipeline view possible. When you run a Claude Code session, the dashboard binds it to the lane that owns its working directory (`cwd`) through **longest path-boundary prefix matching**. This allows:

- Multiple sessions on the same directory to feed into one visible lane
- Nested working directories to own their own nested lanes (deeper paths take precedence)
- A session to migrate from one directory to another without losing its lane relationship

**Lanes are keyed by `cwd`, not `session_id.** A session is ephemeral (you run it, it finishes); a lane survives restarts and shows the cumulative progress through a declared pipeline.

## Creating a lane

Create a lane bound to a working directory with `ccam lanes add`:

```bash
ccam lanes add --cwd /path/to/repo --title "My Feature"
```

The lane is now ready to track work. When you run a Claude Code session in that directory (or a subdirectory), the dashboard will bind the session to the lane automatically by matching the cwd.

**Note:** The directory must exist and be an absolute path. A lane with a cwd of `/tmp/wt` will NOT capture `/tmp/wt-sibling` (no partial prefix match) but WILL capture sessions in `/tmp/wt/subdir/` (subdirectories are owned by the parent lane unless a deeper lane exists).

To provision a dashboard-managed git worktree instead of adopting an existing directory, use a source repository:

```bash
ccam lanes add --repo /path/to/repo --title "My Feature" --base main --slug my-feature
```

`--title`, `--base`, and `--slug` are optional. The CLI waits for background provisioning to finish and reports either the ready lane or its failure notes.

Adopting your main repo (`ccam lanes add --cwd $(pwd)`) is also how you get stage detection working for sessions that work directly in it rather than in a worktree — see "Superpowers skill invocations" below. Once adopted, that lane's own card lists every managed-worktree lane whose `source_repo` matches its `cwd`, each a clickable link to jump to that lane.

Adding a lane through the dashboard's "+ Add lane" flow also auto-runs, best-effort, in parallel: `ccam lanes profile init` (only if a Node.js project is detected — most repos won't be, and that's a normal outcome, not a failure), `ccam lanes agents install`, and `ccam lanes mcp sync`. None of the three blocks the lane from being created or from each other — a lane whose repo has no MCP servers configured, for instance, still gets created and is still usable, just without a synced `.mcp.json`. The modal shows a ✓/✗ summary of the three results and stays open until dismissed (Cancel/X) — it does not auto-close. Run any of the three manually later (from the lane's own card, or the CLI) if the automatic attempt didn't apply.

### The "+ Add lane" modal

The modal has a segmented toggle mirroring the CLI's two modes:

- **Repo** — adopts the given directory as-is (maps to `ccam lanes add --cwd`). No branch fields; the auto-setup summary above does not run (adopting is instant, nothing to wait on).
- **Worktree** (default) — provisions a managed worktree (maps to `ccam lanes add --repo`). Unlike the CLI, the modal requires you to type the new branch's name yourself rather than deriving one from the title — the underlying route still derives one when `branch` is omitted, so the CLI's behavior is unchanged.

Both modes' path field has a **Browse** button next to it, opening a small folder browser (`GET /api/lanes/browse?path=<abs>`) instead of a native OS picker — a browser cannot hand a web page an absolute filesystem path from a native dialog, so this dashboard (local-first, server and browser on the same machine) lists directories server-side instead: click a subfolder to descend, ".." to go up, "Select this folder" to fill the path field. Git repos are marked in the listing.

## Destructive lane actions

Reset a managed worktree, remove one, or purge the lane's eligible session history with the CLI:

```bash
ccam lanes reset <id> [--force] [--keep-db] --yes
ccam lanes remove <id> [--force] --yes
ccam lanes purge <id> --yes
```

Each command first fetches and prints its preflight counts. `reset` and `remove` show `head`, `dirty`, `untracked`, and `unpushed` (plus `database`, the name a data-isolated lane's reset/remove will drop — see "Data isolation" below); `purge` shows `sessions`, `events`, and `tokenRows`. The action refuses to run without `--yes`, and sends those exact facts back as its confirmation. Use `--force` only when the preflight reports unpushed commits. `--keep-db` (reset only) skips the whole drop-recreate-migrate-reseed sequence, leaving the lane's database exactly as it was. An adopted lane points at a directory you own, so the CLI refuses to `reset` it. `remove` IS allowed for an adopted lane: it drops only the dashboard's record and leaves the directory, its contents, and its database (if any) untouched.

## Lifecycle

### The two lane kinds

- **`managed`** — a git worktree the dashboard itself created (`ccam lanes add --repo`), rooted under `LANES_ROOT`. The dashboard owns its full lifecycle: it may reset the worktree to its base branch or remove it entirely.
- **`adopted`** — an existing directory you already had (`ccam lanes add --cwd`). The dashboard only ever tracks it; it never resets or deletes that worktree. "Removing" an adopted lane drops the dashboard's record of it and leaves the directory untouched.

### The three independent safety checks

Before `reset` or `remove` touches a worktree, `assertDestroyable` (`server/lib/worktree.js`) runs three checks, all of which must pass:

1. **`lane.kind === "managed"`.** An adopted lane fails immediately with `ENOTMANAGED` — this check alone is what keeps a directory you own off the destroy path.
2. **The lane's `cwd`, resolved with `fs.realpathSync`, must sit inside the resolved `LANES_ROOT` on a path boundary.** `path.relative(root, cwd)` must not start with `..` or be absolute — `EOUTSIDEROOT` otherwise. This guards against a lane row that was hand-edited or drifted to point somewhere else.
3. **The resolved path must actually appear in `git worktree list --porcelain`** for the lane's `source_repo` — `ENOTWORKTREE` otherwise. A directory that merely happens to sit under `LANES_ROOT` but was never registered as a worktree of that repo is not destroyed.

These checks run unconditionally inside `resetWorktree`/`removeWorktree` themselves, not only when a confirmation is present — there is no code path to a git-destructive operation that skips them.

One documented exception, which does not weaken them: when a managed lane's directory has already been deleted by hand, `removeWorktree` takes a **prune path** instead. Checks 1 and 2 still hold (an adopted lane is refused outright; the recorded `cwd` must still be inside `LANES_ROOT`, verified lexically because a vanished path cannot be resolved), and check 3 is what the prune replaces — a worktree git no longer lists needs no removal. That path runs `git worktree prune` plus a safe branch delete against the source repo's bookkeeping and touches no directory at all.

### Each verb

- **`add`** — either adopts an existing directory (`--cwd`, kind `adopted`) or provisions a new managed worktree (`--repo`, kind `managed`, created under `LANES_ROOT` on branch `feat/<slug>`).
- **`clear`** (UI/API action only, no CLI verb) — resets the lane's own bookkeeping (stage, status, gate/CI fields, notes) back to idle, **including the detected columns** (`detected_stage`/`detected_signal`/`detected_at`), since detection is forward-only and a surviving detection would both claim progress the reset tree no longer has and block every later detection. Touches only the `lanes` row; no git operation, no session/event data is deleted.
- **`reset`** (managed lanes only) — checks out the base branch, `git reset --hard` to it, then `git clean -fd` (no `-x`, so **gitignored files such as `node_modules` and `.env` survive**; only untracked-but-not-ignored files are deleted), then recreates the feature branch off the base and clears the lane's bookkeeping. Requires `force: true` when the preflight reports unpushed commits.
- **`remove`** — for a `managed` lane whose directory exists: `git worktree remove --force`, `git worktree prune`, then a safe branch delete, then the lane row is deleted. For a `managed` lane whose directory was deleted by hand: the prune path above (git's stale record and the branch are cleaned up, then the row is deleted) — a `missing` worktree does NOT make a lane unremovable. For an `adopted` lane: only the lane row is deleted (`removeWorktree` is never invoked for `adopted`, so the directory is never touched). The unpushed-commits force-gate only applies when the worktree is actually touched, i.e. `action === "remove" && kind === "managed"` — forgetting an adopted lane needs no `force` even with unpushed commits, since nothing on disk is at risk.
- **`purge`** — deletes the lane's own `sessions`/`events`/`token_usage` rows (excluding the lane's currently-bound or any still-active session), for its own `cwd` and subdirectories. No git operation, no worktree change; not gated on unpushed commits.

### The preflight contract

`GET /api/lanes/:id/preflight?action=reset|remove|purge` (`server/lib/lane-preflight.js`) is read-only and returns:

- **`reset`/`remove`**: `{ action, lane, kind, branch, head, dirty, untracked, unpushed, database, blocked[], warnings[] }`
- **`purge`**: `{ action, lane, sessions, events, tokenRows, bytesEstimate, activeSessionSkipped }`

`blocked[]` can contain: `adopted` (not a managed worktree), `missing` (the directory is gone), `unreadable` (directory exists but git failed against it), and `unpushed-commits` (unpushed count > 0 — the only one a `force: true` can override).

**Which entries actually prevent the action depends on the action, and the server is the authority.** All of them block `reset`. **None of them blocks `remove`** — the server supports removing an adopted lane (forget the row), a hand-deleted worktree (prune path), and an unreadable one: it attempts `git worktree remove --force`, and if git itself refuses (e.g. a corrupt worktree `.git` pointer, which git validates and rejects even with a second `--force`), it deregisters the worktree directly from the source repo's bookkeeping instead — the directory itself is never touched either way. A surface that greys out confirmation on any `blocked` entry regardless of action makes a documented capability unreachable; `client/src/components/lanes/DestructiveLaneModal.tsx` encodes the per-action set in `HARD_BLOCKERS` and renders the rest as context.

`unpushed` is the count of commits the action would really discard: with remotes, commits on no remote; without remotes, the commits ahead of the lane's `base_branch`, which is this lane's own work. A freshly provisioned worktree in a local-only repository reports `0`, not that repository's whole history — the `no-remote` warning, not an inflated count, is what tells the user nothing is backed up. A lane with no `base_branch` at all (an adopted one) falls back to the total commit count. `warnings[]` holds purely informational facts that never gate the action: currently just `no-remote` (no git remote configured at all — nothing here is backed up remotely, but the action proceeds normally). Both arrays are data, not an exception.

`database` is the database name a `reset` (unless `--keep-db`) or `remove` will drop — `null` when the lane has no slot yet or its profile declares no `DB_PREFIX`. It is derived, not stored, the same way `slot`/`ports` are.

`bytesEstimate` is a **rough estimate**, not a measured disk size: it is derived as `(events + tokenRows) * 512`, a flat per-row byte guess, purely to give the confirmation dialog an order-of-magnitude sense of what purging will reclaim.

Every destructive `POST /api/lanes/:id/:action` must echo back an `expect` object with exactly the fields listed above for that action. The server re-runs preflight at execution time and rejects the request (`400 EEXPECT` if incomplete, `409 ESTALE` if any field has changed since the client read it) rather than trusting a client-supplied count.

### Environment variables

- **`LANES_ROOT`** (default `~/.claude/ccam-lanes`) — the directory managed worktrees are provisioned under; also the boundary that safety check 2 resolves paths against.
- **`LANE_DEAD_SEC`** (default `300`) — seconds of silence before a lane whose stage matches `/watch|poll/i` flips from `active` to `dead` liveness.
- **`LANE_BASE_BRANCH`** (default `main`) — the base branch a new managed worktree resolves against when a request omits `base`. An explicit `--base <branch>` (or request body `base`) always wins over this default.
- **`LANE_BRANCH_PREFIX`** (default `feat/`) — the prefix used to build a new managed worktree's feature branch name (`<prefix><slug>`).

### Limitation: a fresh worktree has no dependencies

`ccam lanes add --repo` runs `git worktree add` only. It does not run `npm install` (or any other package manager), and it does not copy the source repo's untracked local files (`.env`, IDE config, etc.) into the new worktree. A managed lane is ready for `git` immediately but needs its own dependency install and local env setup before a session can run the project inside it.

A repository can close the dependency half of that gap itself by declaring a `bootstrap` hook in its profile (below) and running `ccam lanes hook bootstrap`. Seeding a lane's `.env` and its database is handled automatically once the profile opts in — see "Data isolation" below.

## Lane runtime: running a lane's own stack

A lane isolates code. Without more, two lanes running their project at the same time collide on everything else — the same ports, the same directories. The **runtime** layer gives each lane its own slot, and derives its ports and per-lane directories from it.

This is resource namespacing on the host, **not** a container: lanes run as the same user, share the network, and can read any file you can. If you need stronger isolation than that, this is not it.

### Declaring a profile

Everything stack-specific lives in the repository, at `<repo>/.ccam/profile/`. CCAM is multi-repo, so there is no global profile setting — a profile travels with the repo it describes, and therefore already exists in every worktree cut from it.

```
myapp/
  .ccam/profile/
    profile.env
    hooks/
      bootstrap.sh boot.sh health.sh
      migrate.sh seed.sh ci-gate.sh e2e.sh regen.sh
      db-create.sh db-drop.sh
```

`profile.env` is a `KEY=VALUE` declaration file. It is **parsed, never sourced** — `$(…)`, backticks and `${VAR}` are kept literally, because sourcing arbitrary shell from a repository into the dashboard process would be a code-execution path. Hooks are executed on purpose; config is only read.

```bash
# .ccam/profile/profile.env
PORTS="api fe worker"       # names; each gets a <NAME>_PORT in the hook environment
PORT_BASE_api=8000          # lane in slot 3 prefers :8003
PORT_BASE_fe=3000
PORT_BASE_worker=9000
LANE_DIRS="uploads .cache"  # directories created per lane, inside its working copy
BACKEND_DIR=backend
FRONTEND_DIR=frontend
```

Every key has a default, so a missing one never breaks a lane: `PORTS="api fe"`, `PORT_BASE_api=8000`, `PORT_BASE_fe=3000`, `LANE_DIRS=""`, `BACKEND_DIR=backend`, `FRONTEND_DIR=frontend`, `API_PATH=/api`. A port name with no declared base falls back to `8000`.

CCAM resolves the profile from the **lane's own working copy first**, then its source repository. A branch that changes a boot command must boot with the command it changed; the source-repo fallback exists for a profile kept gitignored, which never reaches a worktree through git.

### Scaffolding a profile automatically

```bash
ccam lanes profile init <repo> [--force]   # detect + write .ccam/profile/
ccam lanes profile check [<path>]          # validate one (path defaults to cwd)
```

`profile init` currently detects **Node.js only**, in exactly two layouts: a root `package.json` (single-service), or `backend/package.json` **and** `frontend/package.json` both present (monorepo, checked first). Anything else — Python/Go/Ruby, a pnpm/yarn/turborepo workspace, non-standard directory names — is refused with an actionable message rather than guessed at; write `.ccam/profile/` by hand for those, following the reference above.

Detection reads `package.json` (which of `start`/`dev`/`preview` exists) and `docker-compose.yml` (a service matching `/postgres/i` or `/redis/i`), never executes anything, and never guesses a migration tool: a detected database gets `migrate.sh`/`seed.sh` scaffolded as an explicit, always-`exit 0` TODO stub, not a guessed Prisma/Knex/TypeORM command. `profile check` is the hard gate — it fails (non-zero exit, every problem listed) on any leftover `TODO:`, any missing or non-executable hook, or a declared port already in use; it only *warns* when `~/.ccam/secrets.env` doesn't exist yet for a database-declaring profile.

`profile check` takes a **path**, not a lane id or `--lane`/`--cwd` flag like every other `lanes` subcommand — it is meant to run against a bare repository right after `init`, before any lane or worktree exists for it.


### Slots and ports

A slot is the small integer every runtime fact derives from. Slots are allocated **lazily** — a lane that is only ever watched never takes one — from `1..LANE_MAX_SLOTS` (default 9), lowest free first, and are freed when the lane is removed. A `reset` keeps the slot: moving a lane's ports out from under a session mid-feature would be a silent, confusing failure rather than a fresh start.

Ports prefer `PORT_BASE_<name> + slot`. When that number is already in use, the allocator steps aside by `+100`, `+200`, … up to ten times, which keeps the last digit equal to the slot so a stepped-aside port still reads as "lane 3". The number a lane actually got is recorded in `lanes.ports` and reused on the next boot, so a lane's URL does not move once it has one. A number is rejected when something is listening on it, when another lane has recorded it (a lane whose stack is down still owns its number), or when an earlier port name in the same boot took it.

If every candidate is busy the boot fails with `EPORTBUSY`, naming the process holding the preferred port.

### The hook contract

Before running a hook, CCAM exports:

| Variable | Value |
|---|---|
| `LANE` | the **slot** number (not the lane id) |
| `LANE_ID` | the lane id |
| `LANE_DIR` | the lane's working copy |
| `SOURCE_REPO` | the repository it was cut from |
| `PROFILE_DIR` | the resolved `.ccam/profile` |
| `RUN_DIR` / `LOG_DIR` | pid files and logs, under `$LANES_ROOT/.state/lane<slot>/` |
| `<NAME>_PORT` | one per declared port, upper-cased (`PORTS="api fe"` → `API_PORT`, `FE_PORT`) |
| everything in `profile.env` | verbatim |

Two shell helpers are injected: `die <msg>`, and `harness_spawn <name> <workdir> <cmd…>` which backgrounds a long-lived service with fully detached stdio and records its pid at `$RUN_DIR/<name>.pid`. **Use `harness_spawn` in `boot`** — a child that inherits the caller's stdout holds that pipe open, and the hook never returns.

Inherited `GIT_*` variables are scrubbed exactly as `server/lib/worktree.js` scrubs them, so a hook that shells out to git cannot inherit a git context pointing at the dashboard's own repository.

```bash
# .ccam/profile/hooks/boot.sh
#!/usr/bin/env bash
set -euo pipefail
harness_spawn api "$LANE_DIR/$BACKEND_DIR" npm run start -- --port "$API_PORT"
harness_spawn fe  "$LANE_DIR/$FRONTEND_DIR" npm run preview -- --port "$FE_PORT"
```

```bash
# .ccam/profile/hooks/health.sh
#!/usr/bin/env bash
set -euo pipefail
curl -sf --retry 30 --retry-delay 1 --retry-all-errors "http://127.0.0.1:$FE_PORT/" >/dev/null
```

Runnable hook names are a fixed allowlist: `bootstrap`, `boot`, `health`, `migrate`, `seed`, `ci-gate`, `e2e`, `regen`, `db-create`, `db-drop`. A name from a request is never turned into a path.

### Up, down, and surviving a restart

```bash
ccam lanes up              # boot the lane owning this directory
ccam lanes up 3 --no-build # boot lane 3, reusing an existing build
ccam lanes runtime         # slot, ports, service liveness, last boot error
ccam lanes logs api        # tail one service or hook log
ccam lanes down            # stop the stack
ccam lanes hook ci-gate    # run any allowlisted hook
```

`up` runs `boot` then `health`. It deliberately does **not** run `bootstrap` — installing dependencies on every boot would make a routine restart minutes long. A failing health check **leaves the processes running**: their logs are what tell you which service never came up, and killing them to report a tidy failure destroys the evidence.

Services are fully detached, so **a lane's stack outlives the dashboard**. Restarting or updating CCAM does not touch a running lane. Nothing has to re-adopt them either: whether a stack is up is recomputed from pid files and port probes on every read, never cached, because a process can die to OOM or a stray `kill` without telling anyone.

`down` kills each recorded pid tree bottom-up (a parent killed first reparents its children to init, where nothing knows to look for them), then — **only when there was a pid file** — sweeps any listener still on the lane's ports. That condition matters: a lane whose stack is already down still owns its port numbers, and an unconditional sweep would kill a server you started there yourself.

While a hook runs, each output line is broadcast as a **`lane_hook_output`** WebSocket message (`{ laneId, hook, stream, line }`) and also appended to `$LOG_DIR/<hook>.log`. A boot ends with **`lane_runtime`** (fresh facts, or an `error`); a hook run started through `POST /api/lanes/:id/hook/:name` ends with **`lane_hook_result`** carrying its exit code. That is what lets a lane card show live progress through a multi-minute build instead of a disabled button that reads as a hang.

### What the runtime does and does not write

The runtime writes `slot` and `ports` on the lane row, and nothing else. It never writes `stage`, `status` or `notes`.

In CCAM those describe **the agent's work**, not the stack's state: `status=running` means a session is working, and a booted server is not a session. Conflating them would corrupt lane liveness. This is the same boundary as "the console never writes a lane's stage". Boot failures live in `$LANES_ROOT/.state/lane<slot>/last-error.json` and surface through `GET /api/lanes/:id/runtime`.

Adopted lanes may be brought up and down — `up` only runs what you could run yourself — but every path that writes into their working copy is refused.

### Runtime environment variables

- **`LANE_MAX_SLOTS`** (default `9`) — how many lanes may hold a runtime at once. Nine keeps `base + slot` readable as a single digit; raising it costs that readability.
- **`LANE_BOOT_TIMEOUT_MS`** (default `900000`) — hard limit on the `boot` hook.
- **`LANE_HEALTH_TIMEOUT_MS`** (default `180000`) — hard limit on the `health` hook; a health check that never returns is a failed boot, not an eternal wait.
- **`LANE_PORT_PROBE_MS`** (default `300`) — connect timeout when probing whether a port is in use.

### Data isolation: database, Redis and `.env` (A2)

Two lanes running their stack at once need more than separate ports — they need separate data, or one lane's migration corrupts the other's session. This is the other half of runtime isolation, and every piece of it is **off by default**: a profile that never declares `DB_PREFIX` gets no database, `REDIS=1` gets no Redis index, and no `ENV_FILES` gets no `.env` writes at all.

**Profile declarations** (`.ccam/profile/profile.env`, all optional):

```bash
DB_PREFIX="myapp_l"          # lane in slot 3 -> myapp_l3 ; empty = no per-lane DB
DB_KIND="postgres"           # informational
DB_URL_SCHEME="postgresql"   # DATABASE_URL scheme
REDIS=1                      # 1 = allocate a logical Redis index = slot
                              # (stock Redis ships 16 logical DBs, 0-15 — keep
                              #  LANE_MAX_SLOTS <= 15 if REDIS=1 is declared)

ENV_FILES="backend/.env"                          # file(s) to seed, relative to the lane
ENV_SOURCE="backend/.env"                         # source path in the source repo (defaults to ENV_FILES)
ENV_REWRITE="DATABASE_URL REDIS_URL UPLOAD_DIR"   # keys CCAM overwrites per lane
ENV_PRESERVE="JWT_SECRET"                         # keys kept from the lane's OWN file on a --force refresh
UPLOAD_SUBDIR="backend/data/uploads"              # exported as UPLOAD_DIR
```

A ready-to-copy template (including `db-create.sh`/`db-drop.sh` for a Postgres-in-docker-compose stack) lives at `server/data/profile-templates/postgres-compose/`.

**Machine-level credentials** live at `~/.ccam/secrets.env` (mode `0600`), never in the repo:

```bash
PG_HOST=127.0.0.1
PG_PORT=5432
PG_USER=postgres
PG_PASS=postgres
REDIS_HOST=127.0.0.1
REDIS_PORT=6379
```

Parsed with the same literal `KEY=VALUE` reader as `profile.env` — never sourced. A missing file falls back to those same defaults (with a one-time warning); a file readable by group or world is refused outright rather than trusted. No route ever returns a value from this file — `GET /api/lanes/:id/runtime` reports a database's *name* and a Redis *index*, never a connection string.

**Who creates the database?** A `db-create.sh` / `db-drop.sh` hook (already in the allowlist) — CCAM stays stack-agnostic, since `createdb` vs `mysqladmin create` vs `touch foo.db` genuinely differ. **Who rewrites `.env`?** CCAM itself: mechanical and identical across stacks, so pushing it into every repo would duplicate the same ~30 lines.

**Hook environment additions**, present only when their owning declaration is (a `db-create.sh` that forgot to check `DB_PREFIX` fails loudly on an unset variable instead of touching a database named "undefined"):

| Variable | Present when | Value |
|---|---|---|
| `DB_NAME` | `DB_PREFIX` set | `<prefix><slot>` |
| `DATABASE_URL` / `TEST_DATABASE_URL` | `DB_PREFIX` set | full connection string to `DB_NAME` / `DB_NAME_test` |
| `PG_HOST` / `PG_PORT` / `PG_USER` | `DB_PREFIX` set | from `secrets.env` (`PG_PASS` is deliberately withheld — nothing in the ported hooks needs it) |
| `REDIS_URL` | `REDIS=1` | `redis://<host>:<port>/<slot>` |
| `REDIS_HOST` / `REDIS_PORT` | `REDIS=1` | from `secrets.env` |
| `UPLOAD_DIR` | `UPLOAD_SUBDIR` set | `<lane>/<UPLOAD_SUBDIR>` |

**When each step runs:**

- **Provisioning** a new managed worktree (`ccam lanes add --repo`) — after the worktree is created: seed `.env`, run `bootstrap`, create the database, `migrate`, `seed`. Runs once.
- **`up`** — repair `.env` (a hand-edited or never-seeded file gets fixed), ensure the database exists (cheap when it already does), `migrate` on every boot (a lane's schema drifts while it sits idle), and `seed` only on the boot that actually created the database.
- **`reset`** — refresh `.env` with `--force` (preserving `ENV_PRESERVE` keys from the lane's own file — swapping in the source's `JWT_SECRET` would 401 a running lane's tokens until reboot), re-run `bootstrap` (a reset can land on a branch with new dependencies), clear the declared `LANE_DIRS`, then drop, recreate, migrate and reseed the database — unless `--keep-db`, which skips that whole block.
- **`remove`** — drops the database and its `_test` sibling before the rest of teardown. Best-effort: a failed drop is logged, never blocks removing the lane's record. **Never runs for an adopted lane** — its data was never CCAM's to create, so it is never CCAM's to destroy, the same invariant that protects an adopted lane's worktree.

A missing source `.env` falls back to `.env.example` with a loud warning, never a silent success. And any hook output that echoes a value from `secrets.env` (the password, specifically) is redacted before it reaches `$LOG_DIR/<hook>.log` or the `lane_hook_output` WebSocket message — that stream reaches a browser tab, and a hook debugging its own environment must not publish a database password to everyone watching.

## The Workspace page (`/run`)

The dashboard web UI merges lanes and runs into a single **Workspace** page accessible at `/run` (the old `/lanes` route now redirects here). Top to bottom:

- **Header** — the page title and four counters (`lanes`, `running`, `needs you`, `dead`), plus Add lane. The `needs you` and `dead` counters appear only when they are non-zero, so a quiet header means nothing is waiting on a human.
- **Detail panel** — the selected lane's declared stage, its inferred stage when detection leads, a full-width pipeline map, and a legend naming all five node states plus the dashed-amber inferred treatment.
- **Terminal** — a real interactive terminal (xterm.js) displaying the tmux session's PTY output, with full support for interactive commands, editors, and pagers. A live run keeps its rendered history and scroll position when scrolling.
- **Split view** — a layout toggle (1 / 2 / 4 panes) renders that many independent terminal panes side by side (`grid-cols-2` for 2, a 2×2 grid for 4). Layout 1 is bound to the lane strip's selection, same as always; layouts 2 and 4 give each pane its own lane picker, independent of the strip. The chosen layout and each pane's lane persist to `localStorage` (`ccam.workspace.splitView`) across reloads.
- **Lane grid** — one card per lane, 1 column, 2 at `md`, 3 at `xl`. Each card carries the lane id, liveness dot and status, title, declared stage with a progress bar and time-on-stage, the `auto:` chip when detection leads, the kind and CI tags, the working-copy facts from `GET /api/lanes/:id/git`, the needs-you banner, and the action row.

Run history is per lane, queryable via `GET /api/run/history?laneId=<n>`.

The UI operates on a working directory (`cwd`), not a lane id. Starting a run in a `cwd` that no lane owns calls `POST /api/lanes/ensure` first, to idempotently find or adopt a lane for that path; a `cwd` an existing lane already owns is matched from the loaded lane list without a round trip. Either way the run is then started through `POST /api/lanes/:id/start` rather than directly through `POST /api/run`.

### Finding or adopting a lane: `POST /api/lanes/ensure`

The Workspace page opens on a `cwd` and needs a lane to exist for that directory without ever creating a duplicate. The `ensure` endpoint handles this:

```bash
curl -X POST http://localhost:4820/api/lanes/ensure \
  -H "Content-Type: application/json" \
  -d '{"cwd": "/absolute/path/to/work", "title": "My Project"}'
```

**Response:**

```json
{
  "lane": { "id": 5, "cwd": "/absolute/path/to/work", "title": "My Project", ... },
  "created": false
}
```

- If a lane already owns the `cwd`, returns that lane with `created: false` and HTTP `200`.
- If the `cwd` is a subdirectory of an existing lane, returns the parent lane that owns it.
- If no lane owns the `cwd`, creates an **adopted** lane and returns it with `created: true` and HTTP `201`.
- A relative or missing `cwd` returns `400 EBADCWD`.

Two concurrent calls for the same path always yield one lane: the database's `UNIQUE` constraint on `lanes.cwd` decides the winner, and the loser re-reads and returns the winning lane.

### Reading a lane's working copy: `GET /api/lanes/:id/git`

Each lane card shows the branch its working copy is actually on, the short
HEAD, that commit's subject, and how much is uncommitted:

```bash
curl http://localhost:4820/api/lanes/5/git
```

```json
{
  "available": true,
  "branch": "feat/rename-metric",
  "head": "9b3e74a",
  "subject": "free-text rule mode in the form",
  "dirty": 2,
  "untracked": 1
}
```

- A `cwd` that is missing, is not a git repository, or makes git fail returns
  `{"available": false}` with HTTP **200**. A lane pointing at a plain directory
  is a normal state, not a fault, and the card simply renders without a git row.
- A detached checkout reports the literal `HEAD` that git returns, rather than a
  prettier invention.
- An unknown lane id is a `404`.

This is **not** folded into `GET /api/lanes` on purpose: it shells out to git
three times, and the lane list is polled and re-broadcast on every hook-driven
`lane_update`. Putting it there would fire a burst of subprocesses behind every
tool call an agent makes. The browser fetches it per card instead, on mount and
every 30 seconds, and a failed fetch is silent.

## Viewing lanes

List all lanes with their current status:

```bash
ccam lanes
```

This shows each lane's:
- **stage**: the declared stage (e.g., `plan`, `implement`, `review`, `done`)
- **status**: `running` (a session is active), `idle` (no active session), or `provisioning`
- **liveness**: `active` (recently updated), `dead` (silent for too long), or `idle` (not expected to be running)
- **progress**: percentage of the pipeline completed (0–100%)
- **needs_action**: a notification if the session is blocked waiting for input

A lane row also gets a `⇢ detected:<stage>` suffix when the server's inferred
stage (see "Stage detection" below) leads the declared `stage` shown in the
row — the same lead/behind comparison the web UI's `auto: <stage>` chip uses,
so the terminal and the browser never disagree about which one is the
headline. Nothing is printed when the declaration already leads or matches.

The dashboard web UI shows each lane as a card in a grid, with the selected lane's pipeline map visualized above.

## Pipeline stages and the five node states

A lane moves through stages defined in a **pipeline template** (see "Custom pipeline templates" below). The default pipeline has eight stages: `intake`, `plan`, `implement`, `tests`, `review`, `gate`, `ship`, and `done`.

**A lane is created on `default` unless told otherwise.** The "+ Add lane" modal has a *Pipeline template* select listing every template the server reports, so this is chosen at creation; `ccam lanes add --pipeline <id>` is the same choice from the terminal.

For a lane that already exists, switch it from the terminal:

```bash
ccam lanes pipeline                 # which template this lane uses, and what else exists
ccam lanes pipeline ship-feature    # switch it
```

or from the dashboard: the pipeline-template select next to the lane's title in the Workspace detail panel does the same `PATCH /api/lanes/:id` the CLI uses, live (disabled while viewing an archived feature snapshot).

Switching re-resolves the lane's existing declared `stage` against the new node list. A stage the old template knew may resolve to nothing in the new one; the switch warns when that happens (both CLI and UI), and the next `ccam stage` fixes it.

## Attaching a real terminal to a lane

`ccam lanes shell` attaches a real terminal to the exact tmux session the dashboard's Start/Resume buttons use for this lane (`ccam-lane-<id>`), creating it if it doesn't exist yet. Type `claude` inside it like any normal terminal session — the dashboard's Workspace terminal view is just another client attached to the same tmux session, so both stay in sync live.

**In practice you never have to pick correctly at creation.** The template only has to match whichever skill is actually driving the lane, and the skill enforces that itself: `ship-feature-lane` runs `ccam lanes pipeline ship-feature` and `ship-feature` runs `ccam lanes pipeline default` before their first `ccam stage` call — a no-op if the lane is already on that template, a self-correction if it isn't. A human chatting with the lane never needs to open the picker; whichever skill gets invoked decides the template.

The dashboard renders every node in the pipeline in one of five **states**:

| State | Color | Meaning |
|---|---|---|
| **failed** | Red | The stage recorded result `"fail"` — work was attempted and rejected |
| **current** | Blue | The lane's current declared stage |
| **done** | Green | The stage was recorded with evidence (an artifact, not just a claim) |
| **passed-no-evidence** | Amber | The stage was recorded without evidence, OR was skipped (a later stage was reached) |
| **pending** | Gray | Not reached yet |

### Why `passed-no-evidence` is amber, not green

A stage in this state was **claimed but not proven**. Two scenarios:

1. **Declared but no artifact left.** A skill called `ccam stage review` without `--evidence`, claiming the stage happened but leaving no proof that work occurred.
2. **Implicitly skipped.** The lane jumped from `plan` to `implement` (to stage index 2), leaving `intake` (index 0) in `passed-no-evidence` state.

In both cases, the stage is not **done** — it's incomplete or untested. Amber signals that the agent claimed to have done this work but the dashboard has no evidence to show it was actually completed. This matters in a pipeline: if your gate checks `done` not `passed-no-evidence`, a lane stuck in amber will block until evidence is provided.

## Reporting a stage

`ccam stage` is not skill-only. Any Claude session working inside an adopted lane's cwd — including a plain chat session where no skill was ever invoked — should call it on real stage transitions. Tool-event detection (see "Inferred vs. declared" below) can only paint the amber "detected" badge; it never moves the blue `current` ring. A lane worked entirely through plain chat that never calls `ccam stage` will keep showing whatever stage it was last declared at (often `intake`), regardless of how much real work happens.

When a skill — or a plain chat session — reaches a significant milestone, it reports the current stage to the dashboard using `ccam stage`:

```bash
ccam stage implement --evidence "Schema created, migrations run"
```

This command:
- **Declares the stage** the work is now at
- **Records evidence** (optional, but highly encouraged) — a short text description of what was completed
- **Moves the progress bar** forward in the pipeline
- **Broadcasts to the UI** so connected dashboards see the update in real-time

### Full command signature

```bash
ccam stage <stage> [--lane <id>] [--cwd <path>] [--status <s>] [--evidence <text>] [--note <text>] [--result pass|fail]
```

**Parameters:**

- `<stage>` (required): the pipeline stage name or alias. The default pipeline aliases are:
  - `intake` / `assigned` / `claimed` / `start`
  - `plan` / `planning` / `brainstorm` / `design`
  - `implement` / `implementing` / `coding` / `build`
  - `tests` / `testing` / `unit` / `gates` / `pre-push-gate`
  - `review` / `reviewing` / `code-review` / `self-review`
  - `gate` / `verify` / `verification` / `sr-gate` / `gate-blocked`
  - `ship` / `pr` / `pr-open` / `publishing` / `commit` / `push`
  - `done` / `complete` / `completed` / `merged`

  Aliases are **per template** — the `ship-feature` pipeline has its own set
  (see "Pipeline template: ship-feature" below). A name matching no node and no
  alias is still recorded verbatim, but `phaseIdx` then resolves it to nothing:
  no node renders `current` and progress reads `0`. The CLI prints a warning to
  stderr and still exits `0` in that case — a typo must not break a
  declaration the lane can record, but it must not pass silently either:

  ```
  ! "revieww" matches no node in pipeline "default" — recorded, but the pipeline map won't show it. Nodes: intake, plan, implement, …
  ```

  The check is skipped for `--result fail`, which paints the node `failed`
  rather than `current`.

- `--lane <id>` (optional): the numeric lane ID. If omitted, the command resolves the lane by `cwd`.

- `--cwd <path>` (optional): working directory to match against a lane's cwd. If omitted, uses the current working directory. Useful when calling from outside the repo.

- `--status <s>` (optional): the lane's overall status (`running`, `idle`, `provisioning`). Allows bundling a status update with the stage report.

- `--evidence <text>` (optional): a short description of what was completed at this stage. Moves the node from `passed-no-evidence` to `done`.

- `--note <text>` (optional): a longer note or comment, separate from evidence.

- `--result pass|fail` (optional): explicitly mark the stage as passed or failed. Ignored if `result` was already set; set once, never overwritten by a re-report.

### Example: a skill reporting progress

A `build` skill might call:

```bash
ccam stage implement --evidence "Built and ran tests, 42 tests passing" --status running
```

Output:
```
lane #5 → implement (66%)
```

A later call reports completion:

```bash
ccam stage tests --evidence "Pre-push gate: all linters passing" --result pass
```

## Custom pipeline templates

The default pipeline is suitable for feature work: `intake` → `plan` → `implement` → `tests` → `review` → `gate` → `ship` → `done`. For different workflows (data pipelines, research phases, deployment stages), you can provide custom templates.

### Where templates come from

1. **Built-in:** `server/data/pipelines/default.json` (always available)
2. **User override:** directory specified by the `DASHBOARD_PIPELINES_DIR` environment variable

If both exist, **files in the user directory override built-ins** with the same `id`.

### Custom template format

Create a JSON file in your custom pipeline directory (e.g., `~/.ccam/pipelines/ml-training.json`):

```json
{
  "id": "ml-training",
  "name": "ML Training Pipeline",
  "nodes": [
    { "id": "data",      "label": "data",      "icon": "📊", "gate": false, "aliases": ["intake"] },
    { "id": "preprocess","label": "preprocess","icon": "⚙️", "gate": false, "aliases": ["prepare", "clean"] },
    { "id": "train",     "label": "train",     "icon": "🧠", "gate": false, "aliases": ["training", "fit"] },
    { "id": "eval",      "label": "eval",      "icon": "📈", "gate": true,  "aliases": ["evaluate", "metrics"] },
    { "id": "deploy",    "label": "deploy",    "icon": "🚀", "gate": false, "aliases": ["ship", "release"] }
  ]
}
```

**Schema:**

- **id** (string, required): unique identifier for this template
- **name** (string, optional): display name shown in the UI
- **nodes** (array, required): list of pipeline stages, in order
  - **id** (string): stage identifier (used in `ccam stage`)
  - **label** (string, optional): display name in the UI; defaults to `id` if omitted
  - **icon** (string, optional): unicode emoji or single character shown before the stage name
  - **gate** (boolean, optional): `true` if this stage blocks unless explicitly passed; defaults to `false`
  - **aliases** (array, optional): alternative names for the stage (e.g., `["training", "fit"]` lets you call `ccam stage training`)

Then set the environment variable:

```bash
export DASHBOARD_PIPELINES_DIR=~/.ccam/pipelines
```

When you create a new lane, you can optionally specify which pipeline to use:

```bash
ccam lanes add --cwd /path/to/ml-repo --title "Training run #1" --pipeline ml-training
```

(The pipeline is selected at creation time. Lanes created without `--pipeline` default to the `default` pipeline.)


## Per-feature state and archive

A lane can carry many features (identified by slug) across its lifetime. Each feature has its own saved pipeline state (stage, status, notes) that persists separately from the live lane — the one every session and the Workspace console observe.

**Why:** `clearLane` used to erase the entire lane on each new feature. Now a lane can accumulate many features' saved states, letting you switch between them (via `ccam feature activate`) and keep their pipeline histories separate. This matters for proof galleries, parallel task batches, and any flow where one lane runs many intentional phases.

### The opt-in model

Nothing changes for a lane that never calls `ccam feature activate` — `clearLane` still erases the live stage and status rows exactly as before. Only when you opt in to features does a lane start archiving. At that point:
- `clearLane` archives the **current** active feature (if any) before clearing the live lane row — its saved stage goes into the archive
- A lane that has never activated a feature is unaffected by this change and works exactly as it did before feature support

### Slug canonicalization

Every feature is identified by a canonicalized slug. The rule is:
1. Drop a leading `feat/` prefix if present
2. Replace `/` and whitespace with `-`
3. Keep `[A-Za-z0-9._-]` only
4. **Do NOT lowercase** — slugs preserve case

This is a **deliberately different rule** from `worktree.js:slugify`'s branch-name slugification (which lowercases). The two must never be conflated. Every endpoint and CLI command echoes back the canonicalized form so the caller knows the exact slug that was stored.

### Activate semantics

`ccam feature activate <slug>` (or the API's `POST /api/lanes/:id/features/activate`):
1. Archives the current active feature (if any and if different from the target slug) — copies its live stage/status/notes to the archive
2. Restores the target slug's saved pipeline onto the live lane row — so switching back to a past feature resumes its pipeline exactly where it left off
3. Creates a fresh feature row for a never-seen slug (empty stage/status/notes)

This means activating an archived feature twice resumes the same pipeline both times.

### The Workspace feature picker

The Workspace page's feature picker (read-only) shows every archived and active feature for the lane. Selecting one displays its saved pipeline. **It never changes the live lane** — a read-only view matching the standing rule that "the console never writes a lane's stage". Changing the active feature requires the CLI or the API route, not a UI button.

### CLI commands

```bash
ccam feature list [<id>]                          # List every feature (archived or live)
ccam feature activate <slug> [--title text] [<id>] # Switch to a feature (echoes canonicalized slug)
ccam feature show <slug> [<id>]                   # Show one feature's saved pipeline
```

Omit `<id>` to address the lane owning the current directory.


## Stage detection

Besides the stage a skill explicitly declares with `ccam stage`, the dashboard
also **infers** a stage from the tool events every hook already delivers
(`POST /api/hooks/event`). This is a best-effort heuristic for
un-instrumented sessions that never call `ccam stage` — it fills in a lane's
pipeline map without requiring every skill to be rewritten.

### The evidence boundary

**An inferred stage is never evidence and never renders as done.** Green
(`done`) requires a stage the agent explicitly declared *with evidence*; an
inference can reach dashed amber at most — visually distinct from both solid
green `done` and solid amber `passed-no-evidence`
(`client/src/components/lanes/PipelineMap.tsx`). This boundary exists because
detection is a guess from tool *names* and a handful of string fields, not
proof that the agent actually finished the stage — a `Bash` call matching
`npm run test` could be a flaky retry, not a passing suite. Treating it as
proof would let a lane's pipeline map lie about what actually happened.

The node the agent *declared* itself on is never flagged as detected, so it
keeps its blue `current` ring — including when the declaration came in through
an alias (`ccam stage coding` resolves to the `implement` node, and `stages` is
keyed by the raw declared word, not the node id). Past nodes get the same
protection: `stageRecords` (`server/lib/pipelines.js`) resolves every recorded
key back onto its node, so a stage declared by alias keeps its record — and its
`--evidence` — instead of reading as an inference or losing its `done`. Where a
node has both a canonical record and an alias record, the canonical one wins.

The same rule governs `ccam lanes`: the inferred stage is printed only when it
leads the declared one (see "Viewing lanes" below), and `LaneCard.tsx`'s
`detectionLeadsDeclaration` shows its `auto: <stage>` chip under the identical
condition — the terminal and the browser never disagree about which one is
the headline.

### Which lane a signal is credited to

A hook's `cwd` is the **session's** directory, not the directory the command ran
in. Measured on a real install: 325 of 400 events carried the session's cwd
while the edits and test runs happened in another repo reached with
`cd <other> && …`. The lane doing the work detected nothing; the lane the
terminal started in absorbed all of it.

So `resolveLaneForWork` (`server/lib/lanes.js`) prefers a lane named by the
tool's own input — the `file_path` being edited, an absolute path a command
`cd`s into — and falls back to the session's `cwd` when the input names no other
lane. Deepest match wins, same rule as `resolveLaneByCwd`.

Only the stage inference follows the work. `session_id` and `needs_action` stay
on the session's own lane, because those really are session-scoped facts: the
session is bound to the directory it started in even while it operates
elsewhere.

### What signals are read

`server/lib/stage-detect.js` inspects every incoming hook's `tool_name` and
`tool_input` (`touchLaneFromHook` in `server/routes/hooks.js` calls `detect()`
on each hook). Detection runs ahead of the lane's `needs_action`/`session_id`
bookkeeping — that block returns early when there is nothing to patch, so
detection could not live after it — and therefore sits in a try/catch of its
own: a throwing `recordDetection` (`ENOLANE` on a lane deleted mid-hook,
`SQLITE_BUSY`) must never cost the bookkeeping that predates it. Only these
`tool_input` fields are read — never `old_string`/`new_string` or other editor payloads that can
contain whole code blocks:

- `command`
- `file_path`
- `skill`
- `prompt`
- `pattern`
- `description`
- `subagent_type`

The signal shown to the user is the span the rule's regex actually matched,
plus 24 characters of context on each side, with an ellipsis marking either end
that was trimmed. A shell line like
`cd /home/very/long/path && npm run test:server 2>&1` therefore reports
`` `…path && npm run test:server 2>&1` `` rather than the whole command. A rule
with no `match` fired on the tool name alone and has no span, so it falls back
to the flattened input. Either way the result is capped at 120 characters
(collapsing whitespace first) and stored as `detected_signal` — this is why a
lane's tooltip sometimes shows a file path or a skill name rather than a shell
command: it's whichever of the fields above the matching rule's `tool` carried.

### Superpowers skill invocations

The built-in `default` pipeline's `plan`, `implement`, `review`, and `ship`
nodes each carry a `{"tool": "Skill", "match": "..."}` rule matching the
Superpowers workflow skill names (`brainstorming`/`writing-plans`,
`executing-plans`/`subagent-driven-development`, `code-review`/
`requesting-code-review`, `finishing-a-development-branch`). Invoking one of
these skills is a much stronger signal than a matched Bash command, but it is
still detection, not declaration — it renders dashed amber and never `done`,
same as every other detected stage.

Detection only ever attributes to a lane whose `cwd` matches the hook's
session `cwd` (see "Which lane a signal is credited to" above). A session
working directly in a source repo that was never itself adopted as a lane —
run `ccam lanes add --cwd $(pwd)` from that repo to fix that — gets no
detection at all, because no lane owns that `cwd`.

### Detection expires

Forward-only would otherwise park a lane at the highest stage it ever touched:
a session that ran the test suite reaches `tests` and can never show
`implement` again, even while the agent is back editing code.

So a standing detection holds the forward-only floor only while it is fresh.
Once `detected_at` is older than `DETECTION_TTL_MS` (default `300000`, i.e. 5
minutes), the comparison against `detected_stage` is skipped and the new signal
wins regardless of direction. A `detected_at` that is NULL or unparseable counts
as stale — an unknown age cannot be proven fresh.

Five minutes, not thirty. A session cycles implement → tests → ship → implement
→ tests within one sitting, and a thirty-minute hold pinned the lane at the
furthest stage it ever touched: one push left a lane reading `ship` while the
agent was demonstrably back to running tests. Five minutes is still far longer
than a burst of tool calls, so the anti-flap property is unaffected.

Two things the expiry deliberately does NOT do:

- **It does not weaken declared-wins.** An agent's own claim never expires: a
  lane declared at `review` still refuses an `implement` detection, stale
  standing detection or not.
- **It does not let inference render `done`.** Everything in "An inferred stage
  is never evidence" above still holds. The TTL changes which detection is
  current, never what a detection is worth.

Set `DETECTION_TTL_MS` in the server's environment to change the window; it is
read per call, so no restart is needed for a test harness that sets it.

### Where the rules live

Detection rules are not code — they live in the pipeline template itself, as
a `detect` array on each node. The built-in `default.json`
(`server/data/pipelines/default.json`) ships these rules today, node by node:

| Node | Detect rules |
|---|---|
| `intake` | none — see below |
| `plan` | `Skill` matching `brainstorming\|writing-plans`; `Write` matching `docs/.*plan.*\.md` |
| `implement` | `Edit` (any); `Write` to any path NOT under a `docs/` directory (`^(?!.*(?:^\|/)docs/)`) |
| `tests` | `Bash` matching `\b(npm (run )?test\|pytest\|vitest\|jest\|go test\|cargo test\|node\s+--test)\b` |
| `review` | `Skill` matching `code-review\|requesting-code-review`; `Bash` matching `\bgh\b[^;&\|]*\bpr diff\b` |
| `gate` | none — see below |
| `ship` | `Bash` matching a `git push` **invocation** — `git`, then option groups, then `push` as the first non-flag token — or `gh … pr create` |
| `done` | none — see below |

**`git diff` is deliberately NOT a review signal.** It was, and measured on a
real session four `git diff --stat` runs — used to verify a generated file —
outranked 81 test runs and 30 edits and pinned the lane at `review`, because
`detect()` takes the LAST matching node and `recordDetection` is forward-only.
Reading a diff is constant background activity, so it carries no stage
information. `gh pr diff` stays: that one really is a review act.

**The `ship` pattern matches a git *invocation*, not the word `push`.** Two
weaker forms were tried and both failed against real commands:

- `git[^;&|]*push` (same shell segment) **misses** this repo's own push, because
  `git -c credential.helper='!f() { … }; f' push` puts a `;` between the two
  inside a quoted value. Six real pushes went undetected that way.
- `git[\s\S]*push` (anywhere after `git`) **over-matches**, and did so on a live
  lane within minutes: `git log --oneline -1 && echo "… push …"` pinned the lane
  at `ship`. Since `ship` sits near the end of the pipeline and detection is
  forward-only, that single over-read stuck — the same failure `git diff` caused
  for `review`.

So the pattern consumes option groups explicitly, treating a quoted option value
as one unit, and then requires `push` to be the first non-flag token. That
accepts `git push`, `git -c core.hooksPath=/dev/null push` and the credential
-helper form, while rejecting `git log … "push"`, `git commit -m "don't push"`,
`docker push`, and `npm run push-docs`.

The `ship-feature` template (`server/data/pipelines/ship-feature.json`) carries
its own rules, aimed at the commands and Superpowers skills its driving skill
actually runs:

| Node | Detect rules |
|---|---|
| `intake` | `Skill` matching `brainstorming`; `Bash` matching `ccam … feature activate` |
| `plan` | `Skill` matching `writing-plans`; `Write` matching `docs/superpowers/specs/lane-.*\.md` |
| `implementing` | `Skill` matching `test-driven-development\|executing-plans\|subagent-driven-development\|systematic-debugging`; `Edit`/`Write` to any path NOT under `docs/superpowers/specs/` (resp. not under `docs/`) |
| `gates` | `Bash` matching `ccam … hook ci-gate` or `ccam … sync-base --check` |
| `e2e-feature` | `Bash` matching `ccam … up --qc` or `ccam … hook e2e` |
| `review` | `Skill` matching `code-review\|requesting-code-review\|receiving-code-review` |
| `qc` | `Agent` matching `qc-local`; `Bash` matching `ccam … lanes proof-link` |
| `gate` | `Agent` matching `senior-gate-reviewer`; `Skill` matching `verification-before-completion` |
| `publishing` | `Skill` matching `finishing-a-development-branch`; `Bash` matching a `git push` **invocation** (the same pattern `default.json`'s `ship` uses) |
| `pr-open` | `Bash` matching `gh … pr create` |
| `watching-pr` | `Bash` matching `gh … pr view` |
| `e2e-feature-passed`, `qc-plan`, `reported`, `merged`, `done` | none — declaration-only |

Two rules are deliberately absent from this template. There is **no `git diff`
rule on `review`**, for the reason the `default` template learned the hard way
below; the `code-review` skill invocation is the honest signal. And `merged` /
`done` carry no rule at all, because inference must never reach a terminal
state — a test pins that.

Detection here is a **safety net, not the mechanism**: the `ship-feature-lane`
skill declares every one of these stages with `ccam stage` itself. What
detection adds is the stage an agent forgot after a context compaction, the
heartbeat that keeps a working lane from reading STALLED, and coverage for a
lane running Superpowers skills without the driving skill at all. It cannot
substitute for the skill's own declarations: because `recordDetection` is
forward-only AND never overrides a higher declared stage, a fix-loop re-entry
that drops back to `gates` is invisible to detection — only the skill's
`ccam stage gates` moves the lane back down.

`intake`, `gate`, and `done` in `default.json` deliberately have no rules.
`intake` is where a lane starts — there is no tool event that means "just claimed," so there is
nothing to detect. `gate` and `done` are explicitly out of scope for
inference (see the task's "Out of scope" list): a gate's pass/fail is a human
or skill decision, and `done` is the one state detection must never reach on
its own — inferring either would let a heuristic assert an outcome instead of
observing activity.

To add a rule, drop a template into the directory named by the
`DASHBOARD_PIPELINES_DIR` environment variable (see "Custom pipeline
templates" above) with a `detect` array on the node you want to match:

```json
{ "id": "implement", "label": "implement", "detect": [
  { "tool": "Bash", "match": "docker build" }
] }
```

`match` is a JavaScript regular expression tested against the flattened
`tool_input` string; omit `match` entirely to match on `tool` name alone. An
invalid regex is skipped rather than blocking hook ingestion.

### Forward-only, write-on-change

Detection never rewinds a lane and never fights a declaration:

- **Forward-only.** A detection only overwrites `detected_stage` when its
  node index is strictly greater than the current `detected_stage`'s index —
  reading a file after editing it must not drag a lane back to `plan`.
- **Declared beats detected.** A detection is written only when the lane's
  *declared* stage index is strictly less than the detection's. A lane
  already declared at `review` ignores an `implement` detection outright.
- **Write-on-change only.** The database write (and the `lane_update`
  WebSocket broadcast) happens only when `recordDetection` reports an actual
  change. A real install saw 29,470 `Bash` events alone from one project —
  writing to the DB and broadcasting on every matching hook, rather than only
  on a genuine advance, would turn routine ingestion into a DB write and a WS
  frame per tool call.

Detection writes only `detected_stage`, `detected_signal`, and `detected_at`
(`server/lib/lanes.js`'s `recordDetection`) — it **never** writes `lanes.stage`,
the declared field. The agent's own declaration is the only path to a stage
being recorded as `done`.

## Liveness: detecting dead lanes

The dashboard watches for silent sessions using two rules:

### The liveness rule

A lane's **liveness** state (shown as `active`, `idle`, or `dead`) depends on:

- **Lane status** (`running`, `idle`, `provisioning`)
- **Stage name** (does it match `watch|poll` regex?)
- **Age** (how long since the last event?)

**Idle lanes are never dead.** If a lane's status is `idle`, it's at rest by design — no session is expected to be running. A session might connect later.

**Watching sessions die after silence.** When a lane's stage matches the pattern `/watch|poll/i` (e.g., stage `watch-for-updates`), the session is expected to emit heartbeat events. If it goes silent for longer than `LANE_DEAD_SEC` (default 300 seconds), the dashboard marks it as `dead`. A watcher with no events is a dead process; an idle session with no events is just idle.

### Configuring the timeout

Set the environment variable to change when a watcher is considered dead:

```bash
export LANE_DEAD_SEC=600  # 10 minutes instead of 5
```

## Housekeeping: ccam lanes gc

Runs machine-wide, not against one lane — safe to run any time, running lanes and live sessions are unaffected:

```bash
ccam lanes gc [--dry-run]
```

Two things, both scoped to what's actually stale:

- **Reaps orphaned Playwright MCP processes.** A `.playwright-mcp`-scoped process whose owning Claude Code session died gets reparented to pid 1 — a live session's MCP keeps its real parent and is left alone. Kills the whole process tree so a spawned browser doesn't leak too.
- **Caps oversized hook logs.** Any `LANES_ROOT/.state/lane<N>/logs/*.log` over 10MB is truncated in place to its last 2MB (same inode — a concurrent writer's file descriptor stays valid).

`--dry-run` prints what would happen without doing it. This is a deliberately narrower port of Shipyard's `lane-gc.sh` — it does NOT auto-remove stale worktrees by age (that would violate this repo's own never-automatic-destroy rule; use `ccam lanes reset|remove|purge` explicitly instead), archive feature state (CCAM's lane/feature state lives in the database, not flat files), or sweep scratch debris (CCAM doesn't generate the files Shipyard's own scripts did). See `docs/superpowers/specs/2026-08-05-lane-gc-design.md` for the full scoping rationale.

## Lane actions

The web UI and CLI provide these actions on a lane:

### start

Start a tmux-backed run attached to the lane. The Workspace page's "Start Run" button calls `POST /api/run` with the lane's id; you can also attach from a real terminal using `ccam lanes shell`.

```bash
curl -X POST http://localhost:4820/api/run \
  -H "Content-Type: application/json" \
  -d '{"laneId": 5, "initialPrompt": "continue the work"}'
```

The `initialPrompt` field is optional — if omitted, the tmux session is created/attached with no initial input, and you type into the terminal directly. Returns `{ id, laneId, status, cwd, model, permissionMode, effort, resumeSessionId, sessionId, startedAt, promptPreview }` where `id` is the tmux session name. The same tmux session persists across attach/detach cycles, so you can switch between the browser Workspace and `ccam lanes shell` seamlessly.

**A killed run releases the lane.** When the tmux session is terminated (from the terminal, browser stop button, or external `kill`), the lane's `run_id` is cleared, its status returns to `idle`, and the change is broadcast as `lane_update`. Runs are recorded with the lane's id and are listable via `GET /api/run/history?laneId=<n>`.

### stop

Terminate the running session. If the lane has no live run, this is a no-op (no error).

```bash
curl -X POST http://localhost:4820/api/lanes/5/stop
```

### clear

Reset the lane's pipeline progress, stages, notes, and inferred stage. The lane itself persists; only its recorded history is cleared.

```bash
curl -X POST http://localhost:4820/api/lanes/5/clear
```

### remove

Delete the lane entirely, including all its history. **Requires confirmation** (`confirm: true`):

```bash
curl -X POST http://localhost:4820/api/lanes/5/remove \
  -H "Content-Type: application/json" \
  -d '{"confirm": true}'
```

**Actions gated behind confirmation:** `remove` requires the `confirm` flag to prevent accidental deletion.

## Proof gallery

A lane's proof gallery is a collection of QC screenshots captured during active work, grouped by feature (the same slug from **Per-feature state and archive** above) and phase (e.g. desktop, mobile, e2e, visual). A QC agent running an MCP server like `playwright-mcp` captures screenshots to disk at `<lane.cwd>/.playwright-mcp/proof/<slug>/<phase-group>/` and generates an optional ticket report at `<slug>/ticket/REPORT.html`. The Workspace gallery panel displays these files grouped by feature, using the same feature picker as the per-feature state section.

### Storage

Proof files live inside the lane's own `cwd`, not under `LANES_ROOT`:

```
<lane.cwd>/.playwright-mcp/proof/
├── auth-redesign/
│   ├── desktop/
│   │   ├── 01-login.png
│   │   └── 02-signup.png
│   ├── mobile/
│   │   ├── 01-login.png
│   │   └── 02-signup.png
│   └── ticket/
│       └── REPORT.html
├── another-feature/
│   ├── e2e/
│   │   └── 01-user-flow.png
│   └── ticket/
│       └── REPORT.html
└── …
```

### Linking proof directories (the `ensure_proof_link` primitive)

An MCP server's `--output-dir` flag may point to different locations across runs. To converge all proof onto one canonical path regardless, CCAM provides the `ensure_proof_link` operation, exposed only as the explicit `ccam lanes proof-link` CLI command — it is **never automatic**. This matches the "CCAM does not orchestrate" rule: a session decides when to link, not the dashboard.

`ensure_proof_link` works as follows:

1. If a stray `proof/` directory exists at `<lane.cwd>/proof`, merge its contents into the canonical `.playwright-mcp/proof` (no-clobber — existing files are never overwritten) and replace it with a symlink.
2. If a `proof/` symlink already points to `.playwright-mcp/proof`, the operation is a no-op.
3. If a file named `proof` exists (neither directory nor symlink), it is left untouched to avoid clobbering a user's file.

The operation is idempotent and always safe — running it multiple times on the same lane has no side effects.

### Security

Every path the proof module touches — reading, serving, or deleting files — is resolved, realpath'd, and checked to be inside the lane's proof root before any filesystem operation. Symlink escapes, path traversal (`../`), and bad characters (`/`, `\`, `..` in segment names) are all rejected with `EBADPATH` errors. `deleteProof` never removes the `ticket/` directory, only the phase-group subdirectories and their images, so a lane's ticket report persists even when phase proofs are pruned.

### Gallery panel and feature selection

The Workspace page's gallery panel reuses the feature picker from **Per-feature state and archive** — there is only one selector, not a separate one for proofs. Selecting a feature displays that feature's saved pipeline (from per-feature state) and its proof gallery (if any proofs exist for that feature).

## Cross-lane named locks

Cross-lane named locks serialize work that thrashes a shared machine — builds, e2e runs, database migrations — across all lanes, not just within one lane. This is a separate axis from `withLaneLock`, the in-process per-lane lock in `server/lib/lane-lock.js`: `lane-lock` is about _when_ a lane runs internal operations; `named-lock` is about which _other lanes_ must wait.

### How they work

- **Atomicity via `mkdir`.** Lock ownership is declared via an `owner` marker file inside `LANES_ROOT/.locks/<lock-name>/`. `mkdir` atomically creates the lock directory or fails with `EEXIST` — no race between check and create.
- **Owner file format:** `<holder> <acquired-epoch-seconds>` — the holder identity (defaults to `lane<slot>` for the calling lane) and a Unix **seconds** timestamp. When a new acquire finds the directory already exists but the holder is stale (older than `LOCK_MAX_HOLD` seconds, default 2700s / 45 minutes), the old holder is considered dead, its directory is removed, and the acquire is retried once before answering.
- **The `LOCK_MAX_HOLD` floor.** The default is 2700 seconds, but it has a **hard floor of 300 seconds**. No caller can force-break a live holder by setting `LOCK_MAX_HOLD=1` — the floor prevents that mistake. The lowest possible break threshold is 300 seconds, even if `LOCK_MAX_HOLD` is overridden to something smaller.
- **Waiting and polling.** `ccam lock acquire` blocks the calling lane (polling the server every ~2 seconds via a single-shot `POST /:name/acquire` — the server itself never blocks or queues) until the lock is free or `--timeout` expires. While waiting, it prints a status line every ~60 seconds, so a long wait reads as "still waiting", not a hung command — this is terminal output for whoever is watching, not a dashboard liveness signal.

### The CLI

```bash
ccam lock status [<name>]
```
Show one named lock's current holder, or every currently-held lock. `<name>` is optional — without it, lists all locks.

```bash
ccam lock acquire <name> [--holder X] [--timeout N]
```
Acquire a cross-lane named lock, polling until it is free or the timeout expires. `--holder` defaults to `lane<slot>` (the calling lane's identifier based on its slot). `--timeout` is in seconds; without it, the command waits indefinitely.

```bash
ccam lock release <name> [--holder X]
```
Release a lock. Refused with status `409` if the `--holder` does not match the current owner. The `--holder` default is the same as `acquire`: `lane<slot>`.

### The lane card

The lane card shows a lock badge when the lane **holds** a named lock (its `lane<slot>` identity matches a held lock's `holder`) — polled every 30 seconds, the same interval as git and runtime facts. There is no server-side concept of "who is waiting" to display; only who currently holds.

### Etiquette

**Waiting is normal.** A lane that sits at a lock for a few minutes while another finishes a build is expected behavior, not a failure. Do not interrupt or force-break a lock.

- **Never kill a holder.** If a lane is stuck holding a lock, do not kill the process or the dashboard. Investigate why the holder is not releasing it.
- **Never delete the lock directory by hand.** A lock that outlives its holder (e.g. after a hard reboot) is cleaned up automatically — the next `acquire` on that name finds it stale (older than `LOCK_MAX_HOLD`) and breaks it. Deleting `LANES_ROOT/.locks/<name>/` yourself only races whoever else's `acquire` is about to do the same check safely.
- **Never shrink `LOCK_MAX_HOLD` to force through a wait.** The 300-second floor exists specifically to stop this mistake. If the true holder is gone, the 300-second minimum wait is the price of safety. If the true holder is still running (e.g., a build with a network stall), shortening the timeout from 2700 to 300 does not help — it converts a slow success into a premature timeout, leaving the lock held and every other lane blocked forever.

## The ship-feature-lane skill (E1)

The **ship-feature-lane** skill is the ported Shipyard driving skill for autonomous end-to-end feature pipelines in a single CCAM lane. It coordinates the entire development flow: implementation (TDD) → pre-push CI gates + dev preflight → e2e testing → code review → local QC → senior gate authorization → PR push and publication → CI watch → final report.

### Installing the skill (once per machine)

`/ship-feature-lane` only works once Claude Code can discover the skill from *any* lane's working directory — Claude Code auto-discovers `.claude/skills/` only from the repo that owns it, and this skill lives in `ccam-lanes`' own checkout, not in any lane's repo. Install it globally first:

```bash
ccam skills install
```

Copies `.claude/skills/ship-feature-lane/` into `~/.claude/skills/ship-feature-lane/` (overwrites on reinstall — run it again after pulling an update to the skill). One-time per machine, same as `ccam lanes agents install` is one-time per lane.

### Invoking the skill

```bash
# Inside a lane's working directory:
/ship-feature-lane <requirement>
```

The skill frontloads all clarifying questions once, then runs unattended. The only interactive touchpoints are **Stage 0 (Q&A intake)** and **merging the PR on GitHub**; everything else runs to completion or escalates with a `blocked` status visible on the dashboard. Progress is declared via `ccam stage` commands at every step.

### Current status: stages 0–8, 10–12, 14 work; stages 9, 13 deferred; stages 6–7 agent-gated

**Stages implemented now:**
- **0-8**: Intake & frontloaded Q&A → plan → implementation → gates+preflight → e2e on feature branch → code review → QC plan → publish PR
- **10-12**: CI watch on the PR → report → watch PR until merge (gated fix-loop re-entries on review feedback)
- **14**: Done

**Stages currently hardcoded skipped** (pending F's integrations):
- **9 (Ticket)**: Ticket-filing integration not yet built — this stage is skipped entirely.
- **13 (Post-merge verification)**: Dev-CI-wait and dev-QC integrations are off — the stage transitions immediately to `done` with a note explaining the gap.

**Stages 6 and 7 are now unblocked** — run `ccam lanes agents install` once per lane (see "Installing the QC/gate agents" below) before a lane's first run through Stage 6. A lane that reaches Stage 6/7 without having installed the agents will fail to find the `qc-local`/`senior-gate-reviewer` subagent type; install and re-run.

See [the skill text](../.claude/skills/ship-feature-lane/SKILL.md) for the full pipeline definition.

### QC boot flag and profile integration

When the lane stack needs to run under QC conditions (deterministic, mocked externals), use the `--qc` flag:

```bash
ccam lanes up --qc
```

This flag activates the lane's `QC_BOOT_ENV` profile declaration. Define it in the profile's `profile.env` file as space-separated `KEY=value` pairs (the same format as the `PORTS` declaration):

```bash
# .ccam/profile/profile.env
PORTS="app"
PORT_BASE_app=3000
QC_BOOT_ENV="MOCK_PAYMENTS=1 STUB_EMAIL=1"
```

These environment variables are passed to the profile's `boot` hook during `ccam lanes up --qc`, ensuring QC test runs are deterministic.

### Dev preflight and merge safety: sync-base

`ccam lanes sync-base` is the ONE sanctioned merge in the pipeline — `origin/development` into a feature branch — used at Stages 2, 8, and 12. Three modes:

```bash
ccam lanes sync-base --check feat/<slug>      # read-only preflight: fetch + collision check + DEV_DELTA/DEV_OVERLAP
ccam lanes sync-base feat/<slug>               # merge origin/development into the feature branch
ccam lanes sync-base --continue feat/<slug>    # finish after a manually resolved conflict
```

Exit codes: `0` clean, `4` merge conflict (left in place — resolve, commit, then `--continue`), `5` migration-number collision (nothing merged — rename the printed file, re-run).

Two profile declarations control it, both empty (off) by default:

```bash
# .ccam/profile/profile.env
MIGRATIONS_DIR="db/migrations"
GENERATED_MERGE_PATHS="api/openapi.json api/client.ts"
```

`MIGRATIONS_DIR` enables the collision preflight against a numbered-migrations directory. `GENERATED_MERGE_PATHS` gives the listed files a keep-ours merge driver (never hand-merged) and folds the profile's `regen` hook output into the sync commit — the single most common cross-lane conflict, for a repo that generates an API contract/client.

### Installing the QC/gate agents: agents install

Stage 6 (browser QC) and Stage 7 (senior GO/NO-GO gate) run as subagents — `qc-local` and `senior-gate-reviewer` — that must exist in the lane's own `.claude/agents/` before the skill can launch them:

```bash
ccam lanes agents install
```

Writes both agent templates into `<lane>/.claude/agents/` and adds that directory to the lane's local `.git/info/exclude` (never the tracked `.gitignore` — this is a per-clone runtime concern, not an app-repo change). Idempotent and never automatic, the same shape as `ccam lanes proof-link` — a session installs the agents explicitly, once, before a lane's first run through Stage 6/7 (or after a CCAM upgrade ships updated templates — reinstalling overwrites, it doesn't merge).

**Credentials are not embedded.** Unlike Shipyard's original per-lane agent generation, these templates carry no QA account credentials — this repo has no seeded-QA-account system yet. `qc-local` degrades gracefully: if it hits a login page with no credentials block present, it reports `LOCAL-QC: FAIL — login required, no seed-account mechanism configured for this profile` rather than guessing.

**`ticketer`, `dev-qc`, and `pr-reviewer`** are not ported yet — the first two are invoked only by Stages 9/13, which are hardcoded-skipped pending F's integrations; the third isn't referenced anywhere in this skill's text.

### Syncing MCP servers: mcp sync

A lane needs the same MCP servers (Playwright, a local-QC server) as its source repo to run Stage 3/6. `ccam lanes mcp sync` gives it those:

```bash
ccam lanes mcp sync
```

Reads the source repo's already-configured `mcpServers` from `~/.claude.json` (normal Claude Code project-scope config — set this up for the source repo once, the same way you would for any project), relocates any absolute path under the source repo to the lane's own directory, pins a `@playwright/mcp` server's `--output-dir` to the lane's `.playwright-mcp` (so proof screenshots land where the proof gallery reads them), and writes `<lane>/.mcp.json`. Also seeds the lane's Chromium browser profiles from the source repo's own — preserves saved logins, and never overwrites a profile that already exists at the destination.

**No permission/settings changes.** Unlike Shipyard's original `lane-mcp-sync.sh`, this command never writes to `<lane>/.claude/settings.local.json` — no auto-approval rules, no `autoMode` bypass entries. A session's `gh`/`git push` commands go through the normal permission prompt like any other command.

A lane whose source repo has no `mcpServers` configured gets a clear `ENOMCPCONFIG` error, not a silently-empty `.mcp.json` — configure the source repo's MCP servers first, then re-run.

Restart the lane's Claude session after syncing — MCP config is read at session start.

### Checking integration toggles: ccam lanes integration

A profile can declare `.ccam/profile/integrations.env` with `TRACKER_ENABLED`, `DEV_QC_ENABLED`, `CI_WAIT_ENABLED` flags (all off by default — see `profiles/_template/integrations.env`-style declarations in a profile's own docs). Check one:

```bash
ccam lanes integration tracker    # exit 0 = on, 1 = off
```

This only reports what the PROFILE wants — it doesn't file a ticket, run dev-QC, or wait on CI. The agents that would act on an enabled toggle (`ticketer`, `dev-qc`) aren't built yet; `ci_wait`'s consumer (`ccam ci`) isn't either. `ship-feature-lane`'s Stage 9/13/10 stay skipped/fallback regardless of what the toggle reads, until those land.

### Pipeline template: ship-feature (16 node stages)

The skill uses the `ship-feature` pipeline template, which defines the following 16 stages (node IDs):

1. **intake** — frontloaded Q&A and feature activation
2. **plan** — investigation and plan debate
3. **implementing** — TDD implementation
4. **gates** — CI gates + preflight check
5. **e2e-feature** — run e2e on feature branch
6. **e2e-feature-passed** — e2e result gate
7. **review** — code review
8. **qc-plan** — bound QC scope
9. **qc** — browser QC (agent-gated until qc-local lands)
10. **gate** — senior GO/NO-GO gate (agent-gated until senior-gate-reviewer lands)
11. **publishing** — push branch + open/update PR
12. **pr-open** — PR open and published
13. **reported** — report posted
14. **watching-pr** — watch for comments, conflicts, merge
15. **merged** — PR merged, post-verify transition
16. **done** — pipeline complete

The Workspace page (`/run`) displays this template with nodes rendered in five states: `failed` (rejected), `current` (now), `done` (with evidence), `passed-no-evidence` (claimed or skipped), and `pending` (not reached).

### More stage names than nodes

Each node carries aliases, and they do two different jobs. Some absorb a
near-miss (`implement` for `implementing`). Others are **sub-states**: a name
the skill declares to say *why* the lane is sitting on a node, without adding a
node to the map.

This is the shape Shipyard converged on — its dashboard renders 13 nodes while
its `PHASES` table folds roughly 35 stage names onto them. A pipeline map is
read at a glance across many lanes at once, so it stays coarse; the stage name
is read one lane at a time, so it can be specific.

| Node | Near-miss aliases | Sub-states the skill declares |
|---|---|---|
| `intake` | `assigned`, `claimed`, `start` | `bootstrapping` |
| `plan` | `planning`, `brainstorm`, `design` | — |
| `implementing` | `implement`, `coding`, `build` | — |
| `gates` | `pre-push-gate`, `tests` | `migration-collision`, `sync-conflict` |
| `e2e-feature` | `e2e`, `live` | `booting`, `e2e-scoped` |
| `e2e-feature-passed` | `e2e-passed` | — |
| `review` | `reviewing`, `code-review`, `self-review` | — |
| `qc-plan` | — | — |
| `qc` | — | — |
| `gate` | `sr-gate`, `verify`, `verification` | `gate-blocked` |
| `publishing` | `push` | — |
| `pr-open` | `ship`, `pr`, `push-conflict` | `push-revalidate` |
| `reported` | — | — |
| `watching-pr` | — | `pr-comment-fix` |
| `merged` | — | — |
| `done` | `complete`, `completed` | — |

50 names over 16 nodes. Every one of them has a **source**: the skill declares
it, or `default.json` uses it (an agent moving between pipelines will type
what the other one taught it), or Shipyard's `PHASES` lists it. An alias with
no source is not "flexibility" — it is a synonym someone imagined, and the
`ccam stage` warning already catches a name that resolves to nothing, which is
better feedback than silently absorbing every plausible spelling. Twelve
sourceless aliases were written and then cut for exactly this reason.

Two constraints on this:

- **No alias may collide** with another node's id or alias. `phaseIdx` takes the
  FIRST match, so a duplicate would silently resolve a declaration onto the
  wrong node. A test asserts the whole template is collision-free.
- **Aliases of one node share one record slot.** `lane.stages` is keyed by the
  declared string, and `stageRecords` resolves each key onto its node — so
  declaring `migration-collision` and then `gates` leaves ONE record for that
  node (the canonical `gates` one wins). A sub-state that needs to keep its own
  `--evidence` separately has to be a real node, not an alias.

`integrate`, `dev-gates`, `e2e-on-dev` and `push-dev` are deliberately **not**
nodes here. Shipyard had them and retired them on 2026-07-16 (see the comment
above `PHASES` in its `dashboard/src/lib/constants.js`); it now folds those
names into the surviving phases so old feature cards still render. CCAM never
shipped them, so there is nothing to fold.

These nodes also carry `detect` rules; see "Stage detection → Where the rules live".

## Orchestration: what CCAM does NOT do

**CCAM does not chain, queue, retry, or evaluate gates.**

The driving Claude Code session is in control. Here's what that means:

- **No automatic chaining:** The lane doesn't automatically move from one stage to the next. A skill declares the stage explicitly with `ccam stage`.
- **No queue:** There is no work queue. When you run a session, it runs immediately; no waiting for dependencies or prior stages.
- **No retry logic:** If a stage fails (marked with `--result fail`), the lane stays at that stage. The next session must be told to reattempt it (the skill logic decides).
- **No gate evaluation:** A gate stage (marked `gate: true` in the template) doesn't block the UI, stop a session, or prevent a transition. It's just a visual marker. The skill must check the gate condition and decide whether to proceed.

**Example:** In a feature pipeline, if the `tests` stage is a gate, and tests fail:

1. A skill calls `ccam stage tests --result fail --evidence "5 tests failing"`
2. The UI shows `tests` in red (failed state)
3. The next session runs and a human/skill must explicitly decide: re-run tests, or skip to ship?
4. If re-running: `ccam stage tests --evidence "2 tests still failing"`
5. If skipping: `ccam stage ship --evidence "manual gate override"`

The **dashboard shows the history; the driving session makes the decisions.**

## Known limitations

### Lanes page snapshot

The Lanes screen currently shows only the empty state in the dashboard's design. Full design and implementation of the populated view (multiple lanes, interactions, pipeline map) is deferred to a follow-up.

### Lane card UI

The lane card UI currently has no prompt/message input field. When you click `start`, it opens a promptless conversation run in Claude Code (no initial input). The `message` action exists server-side and via the API but is not exposed in the web UI yet. To send messages, use the API directly or the CLI.

## Related commands

```bash
ccam lanes                                    # List all lanes
ccam lanes add --cwd <path> --title <text>    # Adopt an existing directory
ccam lanes add --repo <path> [--title <text>] [--base <branch>] [--slug <slug>]
ccam lanes reset|remove|purge <id> [--force] --yes
ccam stage <stage> [--evidence "..."]         # Report the current stage
```

## See also

- `server/lib/lanes.js` — lane storage and lifecycle
- `server/lib/worktree.js` — git worktree creation/reset/removal and the three-check destroy guard
- `server/lib/lane-preflight.js` — the read-only preflight facts behind reset/remove/purge
- `server/lib/pipelines.js` — pipeline templates and node state derivation
- `server/lib/stage-detect.js` — the stage-detection matcher, field allowlist, and signal cap
- `server/routes/lanes.js` — REST API surface
- `bin/ccam.js` — CLI commands for lanes and stage reporting
- `server/routes/hooks.js` — hook-to-lane binding by cwd, and where detection is invoked
